027G3DZ
Dilation Mitral Valve to No Qualifier with Intraluminal Device, Percutaneous Approach
Procedural Specifications
| Clinical Axis | Detail Definition |
|---|---|
| Section | 0 Medical and Surgical |
| Body System | 2 Heart and Great Vessels |
| Operation | 7 Dilation |
| Body Part | G Mitral Valve |
| Approach | 3 Percutaneous |
| Device | D Intraluminal Device |
| Qualifier | Z No Qualifier |
Operation Definition
Expanding an orifice or the lumen of a tubular body part
Procedure Overview
Dilation procedures widen a narrowed or obstructed segment of a heart chamber, valve, or great vessel to restore adequate blood flow. The vessel or opening itself is not cut away or replaced; instead, its internal diameter is expanded, most often using a balloon catheter or a device such as a stent that holds the passage open once it has been stretched. This category covers a wide range of everyday cardiac interventions, from opening a narrowed coronary artery to widening a stenotic heart valve.
These procedures are performed when narrowing restricts blood flow enough to cause symptoms such as chest pain, shortness of breath, or reduced exercise tolerance, or when imaging shows a blockage significant enough to raise the risk of a heart attack or other complication. Because many dilation procedures are done through a catheter rather than open surgery, they often allow for shorter recovery than more invasive alternatives.
Anatomy & Axis Detail
Mitral Valve
The mitral valve controls blood flow from the left atrium into the left ventricle, and dilation of this valve is performed to treat mitral stenosis, most commonly caused by rheumatic heart disease that thickens and fuses the leaflets. Percutaneous balloon mitral valvuloplasty is the standard technique, threading a balloon across the interatrial septum via a transseptal puncture to reach the valve, then inflating it to separate the fused commissures and improve leaflet mobility. This approach is favored in patients with pliable, non-calcified valves and minimal regurgitation, since heavily calcified or regurgitant valves respond poorly and may require surgical repair or replacement instead. Documentation should note the transseptal access route and the valve area achieved, since these details reflect procedural complexity even though they do not alter the coded root operation.
Approach: Percutaneous
Percutaneous describes entry by needle or instrument puncture through the skin or mucous membrane to reach the site of the procedure, without cutting the tissue open or using a visualizing scope. It differs from Open in that the site itself is never exposed, and from Percutaneous Endoscopic in that no endoscope is used to see internal structures. Common examples include needle biopsies and injections.
Device: Intraluminal Device
Intraluminal Device denotes a single device, such as a stent or occlusion device, positioned within the lumen of a tubular body part like a vessel, duct, or airway to maintain patency or occlude flow. It carries no drug coating or radioactivity, distinguishing it from the drug-eluting, radioactive, and bioactive intraluminal device values, and from Extraluminal Device, which sits outside rather than inside the lumen.
Coding & Documentation
Coders assign Dilation when documentation confirms the intent and result was widening a lumen or orifice, and they must note whether a device - such as a drug-eluting or bare-metal stent - was left in place, since device presence is captured through a separate character in the code rather than changing the root operation itself. A frequent error is failing to code multiple distinct vessels or sites dilated in the same session as separate procedures when coding guidelines require it, or missing that a stent placement still gets coded as Dilation rather than Insertion, since the widening is the primary objective and the device is incidental to achieving it. Coders should also confirm whether the approach was percutaneous, percutaneous endoscopic, or open, since this affects the code's approach character.