027J04Z
Dilation Tricuspid Valve to No Qualifier with Intraluminal Device, Drug-eluting, Open Approach
Procedural Specifications
| Clinical Axis | Detail Definition |
|---|---|
| Section | 0 Medical and Surgical |
| Body System | 2 Heart and Great Vessels |
| Operation | 7 Dilation |
| Body Part | J Tricuspid Valve |
| Approach | 0 Open |
| Device | 4 Intraluminal Device, Drug-eluting |
| Qualifier | Z No Qualifier |
Operation Definition
Expanding an orifice or the lumen of a tubular body part
Procedure Overview
Dilation procedures widen a narrowed or obstructed segment of a heart chamber, valve, or great vessel to restore adequate blood flow. The vessel or opening itself is not cut away or replaced; instead, its internal diameter is expanded, most often using a balloon catheter or a device such as a stent that holds the passage open once it has been stretched. This category covers a wide range of everyday cardiac interventions, from opening a narrowed coronary artery to widening a stenotic heart valve.
These procedures are performed when narrowing restricts blood flow enough to cause symptoms such as chest pain, shortness of breath, or reduced exercise tolerance, or when imaging shows a blockage significant enough to raise the risk of a heart attack or other complication. Because many dilation procedures are done through a catheter rather than open surgery, they often allow for shorter recovery than more invasive alternatives.
Anatomy & Axis Detail
Tricuspid Valve
The tricuspid valve sits between the right atrium and right ventricle, and its three leaflets are meant to open widely with low resistance during ventricular filling. Dilation here is performed for tricuspid stenosis, most often rheumatic in origin or related to carcinoid disease, where fused or thickened leaflets restrict forward flow and raise right atrial pressure. Because the valve is thin-walled and sits close to the conduction tissue of the atrioventricular node, balloon dilation is favored over more invasive approaches when leaflet mobility remains adequate. Access is typically percutaneous, threading a catheter through the venous system into the right heart. Documentation should reflect that the valve orifice itself, not the surrounding annulus or chordal apparatus, is the target structure being widened.
Approach: Open
Open approach means the surgeon cuts through skin, mucous membrane, or other tissue layers to physically expose the target site to view before performing the procedure. It gives direct visualization and hands-on access, distinguishing it from Percutaneous approaches where instruments pass through a small puncture without exposing the site. Open is typical for procedures needing wide access, such as most laparotomies.
Device: Intraluminal Device, Drug-eluting
Intraluminal Device, Drug-eluting identifies a single device placed within a body lumen, such as a coronary stent, that releases a pharmacologic agent to reduce restenosis or promote healing at the implantation site. It is distinguished from a plain Intraluminal Device lacking drug coating and from the numbered drug-eluting variants (Two, Three, Four or More), which indicate that multiple such devices were placed in one procedure.
Coding & Documentation
Coders assign Dilation when documentation confirms the intent and result was widening a lumen or orifice, and they must note whether a device - such as a drug-eluting or bare-metal stent - was left in place, since device presence is captured through a separate character in the code rather than changing the root operation itself. A frequent error is failing to code multiple distinct vessels or sites dilated in the same session as separate procedures when coding guidelines require it, or missing that a stent placement still gets coded as Dilation rather than Insertion, since the widening is the primary objective and the device is incidental to achieving it. Coders should also confirm whether the approach was percutaneous, percutaneous endoscopic, or open, since this affects the code's approach character.