03F53Z0
Fragmentation Axillary Artery, Right to Ultrasonic with No Device, Percutaneous Approach
Procedural Specifications
| Clinical Axis | Detail Definition |
|---|---|
| Section | 0 Medical and Surgical |
| Body System | 3 Upper Arteries |
| Operation | F Fragmentation |
| Body Part | 5 Axillary Artery, Right |
| Approach | 3 Percutaneous |
| Device | Z No Device |
| Qualifier | 0 Ultrasonic |
Operation Definition
Breaking solid matter in a body part into pieces
Procedure Overview
Fragmentation of the upper arteries breaks up solid material inside the vessel, such as calcified plaque or a hardened clot, into smaller pieces without removing that material from the body. This is used when an obstruction is too dense or adherent to extract intact, so the surgeon or interventionalist mechanically pulverizes it in place to restore or improve blood flow through the artery.
The procedure is often performed using specialized catheter-based devices that deliver mechanical, ultrasonic, or laser energy to break down the obstructing material, after which the fragments may either be left to disperse naturally or be treated with a separate technique to clear them from the vessel. It is used in arteries supplying the neck, shoulder, and arm when narrowing or blockage is threatening blood supply to the brain or limb.
Anatomy & Axis Detail
Axillary Artery, Right
The right axillary artery continues from the subclavian artery through the axilla and becomes the brachial artery, supplying the shoulder girdle and upper arm. Fragmentation is applied when embolic or thrombotic material lodged in this segment is too firm or extensive for simple retrieval, requiring mechanical disruption into smaller pieces that can be cleared distally. This vessel's location within the axillary sheath, alongside the brachial plexus and axillary vein, means device manipulation must account for surrounding neurovascular structures. Axillary artery involvement often arises from embolic showers originating more proximally, so documentation should reflect whether the procedure addresses a primary lesion or a downstream consequence of disease elsewhere in the arterial tree.
Approach: Percutaneous
Percutaneous describes entry by needle or instrument puncture through the skin or mucous membrane to reach the site of the procedure, without cutting the tissue open or using a visualizing scope. It differs from Open in that the site itself is never exposed, and from Percutaneous Endoscopic in that no endoscope is used to see internal structures. Common examples include needle biopsies and injections.
Qualifier: Ultrasonic
This qualifier indicates use of ultrasonic energy in a procedure, such as an atherectomy device that emulsifies plaque with high-frequency sound waves. It differs from the orbital atherectomy qualifier, which relies on mechanical abrasion instead of acoustic energy, and is chosen when the device technology itself is what distinguishes the procedure coded.
Coding & Documentation
Documentation supporting a Fragmentation code describes breaking apart or pulverizing solid material within the artery, typically using a specific device such as a rotational or laser atherectomy catheter, without describing that the fragments were subsequently captured and removed. The coder must confirm the target artery precisely, since upper artery branches are numerous and the code depends on identifying the correct one.
The most common coding error is assigning Fragmentation when the operative note actually describes the fragmented material being suctioned out or retrieved afterward, which shifts the case to Extirpation instead. Coders should also watch for procedures that combine fragmentation with angioplasty or stenting in a single session, which requires coding each distinct root operation separately rather than folding everything into one code.