ICD-10-PCS Billable Code

0SH433Z

Insertion Lumbosacral Disc to No Qualifier with Infusion Device, Percutaneous Approach

Procedural Specifications

Clinical Axis Detail Definition
Section0 Medical and Surgical
Body SystemS Lower Joints
OperationH Insertion
Body Part4 Lumbosacral Disc
Approach3 Percutaneous
Device3 Infusion Device
QualifierZ No Qualifier

Operation Definition

Putting in a nonbiological appliance that monitors, assists, performs, or prevents a physiological function but does not physically take the place of a body part

Procedure Overview

This family covers procedures that place a nonbiological device into a joint of the lower body - the lumbar, sacral, or coccygeal spine, hip, knee, ankle, or a joint of the foot - without removing or replacing any of the joint's own anatomy. The device stays behind to support, stabilize, or monitor the joint rather than to act as a substitute for bone or cartilage that has been taken out. Examples include interspinous process spacers placed between vertebrae to relieve nerve compression, internal fixation hardware such as screws or pins used to stabilize a joint after injury, and leads for neurostimulators placed near a joint to manage chronic pain.

Patients typically undergo these procedures for spinal stenosis, joint instability following trauma, or chronic pain that has not responded to conservative treatment. Because the device is added to existing anatomy rather than replacing it, recovery generally focuses on protecting the joint while it adapts to the new hardware.

Anatomy & Axis Detail

Lumbosacral Disc

The lumbosacral disc lies between the fifth lumbar vertebra and the sacrum and is subjected to disproportionately high mechanical stress because it marks the transition from the mobile spine to the rigid pelvis, making it a common site of degeneration and herniation. Insertion procedures here involve placing therapeutic material or a device into the disc space to address discogenic pain or early degenerative changes without removing the disc or fusing the segment. Given the disc's proximity to the sacral nerve roots and the cauda equina, image guidance is routinely used during placement. Because this disc is anatomically and functionally distinct from the discs between the upper lumbar vertebrae, it should be coded separately from insertion procedures performed at other lumbar disc levels.

Approach: Percutaneous

Percutaneous describes entry by needle or instrument puncture through the skin or mucous membrane to reach the site of the procedure, without cutting the tissue open or using a visualizing scope. It differs from Open in that the site itself is never exposed, and from Percutaneous Endoscopic in that no endoscope is used to see internal structures. Common examples include needle biopsies and injections.

Device: Infusion Device

Infusion Device denotes a device left in place to deliver medication, fluids, or other substances into a body part over time, such as an intrathecal or epidural pump. It is distinct from devices that merely monitor or mechanically support tissue, since its function is ongoing pharmacologic or fluid delivery rather than structural replacement. Common placements include the spinal canal, peritoneal cavity, and vascular access sites.

Coding & Documentation

A coder needs operative documentation confirming that a device was placed into the joint and left in place, with no accompanying excision or replacement of joint tissue - if tissue is also being replaced, Replacement rather than Insertion applies. The device type and specific joint (by vertebral level or named lower joint) must be documented to select the correct body part and device value. A frequent error is coding Insertion when a fixation device is actually part of a fusion procedure; if the hardware is placed to achieve fusion, the fusion root operation captures the device and Insertion should not be coded separately. Another common mistake is misidentifying the joint level, especially in multi-level spinal cases where each level may require its own code.

Commonly Confused With

FusionInsertion is easily confused with Fusion when internal fixation hardware is involved - the distinction is whether the intent is joint stabilization alone (Insertion) or joint immobilization for bony union (Fusion).
ReplacementIt is also confused with Replacement, which applies when the device physically takes the place of joint structure rather than sitting alongside it.