XRH73FA
Insertion Thoracic Vertebral Joints, 2 to 7 to New Technology Group 10 with Carbon/PEEK Spinal Stabilization Device, Pedicle Based, Percutaneous Approach
Procedural Specifications
| Clinical Axis | Detail Definition |
|---|---|
| Section | X New Technology |
| Body System | R Joints |
| Operation | H Insertion |
| Body Part | 7 Thoracic Vertebral Joints, 2 to 7 |
| Approach | 3 Percutaneous |
| Device | F Carbon/PEEK Spinal Stabilization Device, Pedicle Based |
| Qualifier | A New Technology Group 10 |
Operation Definition
Putting in a nonbiological appliance that monitors, assists, performs, or prevents a physiological function but does not physically take the place of a body part
Procedure Overview
This family describes placing a nonbiological device into a joint to monitor, assist, or otherwise support its physiological function without permanently immobilizing it or replacing joint components. Rather than fusing or replacing the joint, the device is left in place to perform an ongoing role, such as tracking load or pressure, delivering therapeutic stimulation, or assisting movement, and it is classified under New Technology because of its novel design or function.
Candidates for these procedures are often patients with chronic joint instability, early degenerative changes, or a need for objective data on joint mechanics that standard imaging cannot provide, or those receiving an implanted device intended to support joint function over time rather than replace worn-out surfaces outright. Because the joint itself is not resected or fused, patients generally retain a greater range of native motion than they would after replacement or fusion surgery.
Anatomy & Axis Detail
Thoracic Vertebral Joints, 2 to 7
This code covers insertion of a device across two to seven thoracic vertebral joints, reflecting procedures that address a moderate span of the thoracic spine, such as segmental instability or a limited region of degenerative or deformity-related change. Because the thoracic spine has twelve vertebrae and correspondingly numerous facet joints, treating a mid-range number of levels requires implants sized and placed to distribute support across that span while accounting for the stabilizing rib articulations at each level. The specific joint count documented distinguishes this procedure from single-level thoracic insertion and from the more extensive eight-or-more-joint category. This new technology designation identifies a device and technique used for this scope of thoracic involvement that represents an advance not captured by conventional multilevel thoracic instrumentation codes.
Approach: Percutaneous
In New Technology, Percutaneous describes entry into the body via needle or instrument puncture through the skin or a mucous membrane, without a surgical incision, mirroring the same concept in Medical and Surgical. It is distinguished from Open access, which requires a full incision, and from Percutaneous Endoscopic, which adds visualization through the puncture site.
Device / Substance / Technology: Carbon/PEEK Spinal Stabilization Device, Pedicle Based
This is a pedicle screw-based spinal stabilization system constructed from carbon fiber-reinforced PEEK rather than metal, chosen for its radiolucency, which allows clearer postoperative CT and MRI visualization of the fusion site and surrounding tissue without the streak artifact metal implants produce. It differs from titanium or molybdenum-rhenium pedicle systems primarily in this material composition and its downstream imaging advantages rather than in screw placement technique.
Qualifier: New Technology Group 10
New Technology Group 10 flags a procedure as part of the 2023 batch of add-on codes recognized under the New Technology section. The value itself carries no information about the device or drug involved; that comes from the table, body part, and approach values alongside it. Coders should not confuse it with Group 9 or Group 11, which cover the cohorts approved in the years immediately before and after.
Coding & Documentation
Coders should confirm the operative note describes insertion of a distinct appliance into or around the joint, with the device's name or type matching an approved New Technology entry, and that no joint component was removed or replaced in the process. Clear documentation of what the device does - monitoring, assisting, or stimulating - helps confirm Insertion is the correct root operation rather than Replacement or Supplement.
A common mistake is coding this as a joint replacement procedure when the joint surfaces were left untouched and only a supportive device was added. Coders should also watch for cases where an inserted device is later removed or revised, which require different root operations than the original Insertion code.