ICD-10-PCS Billable Code

0DPU40Z

Removal Omentum to No Qualifier with Drainage Device, Percutaneous Endoscopic Approach

Procedural Specifications

Clinical Axis Detail Definition
Section0 Medical and Surgical
Body SystemD Gastrointestinal System
OperationP Removal
Body PartU Omentum
Approach4 Percutaneous Endoscopic
Device0 Drainage Device
QualifierZ No Qualifier

Operation Definition

Taking out or off a device from a body part

Procedure Overview

This family covers taking out a device that was previously placed in or on a digestive organ, such as a feeding tube, stent, drain, or other implanted material, without performing a therapeutic repair on the underlying tissue at the same time. It is used whenever a device has completed its purpose, malfunctioned, or needs to be exchanged, and the physician's task is specifically to extract it.

Common examples include removing a gastrostomy or jejunostomy tube that is no longer needed, retrieving a migrated or clogged esophageal or colonic stent, or taking out a drain that was left in the abdominal cavity near the bowel after a prior operation. This is typically a lower-risk, often outpatient or bedside procedure compared to the original placement, though stent retrieval can sometimes require endoscopic maneuvering if the device has become embedded or displaced.

Anatomy & Axis Detail

Omentum

Removal from the omentum addresses a device secured to or passed through this fatty, richly vascularized apron of peritoneum draped over the abdominal viscera, such as a peritoneal dialysis catheter anchored with an omental wrap or an omental flap-associated drain. Surgeons sometimes deliberately use omentum to buttress a catheter or seal a repair, which means the device can be more adherent to this tissue than to surrounding structures, and removal may involve carefully dissecting omental attachments without disrupting the blood supply to adjacent bowel. This code reflects extraction of the device only, not any accompanying resection or repair of the omentum performed at the same encounter.

Approach: Percutaneous Endoscopic

Percutaneous Endoscopic combines a puncture through skin or mucous membrane with insertion of an endoscope to visualize the procedure internally, as in laparoscopic cholecystectomy. It is distinguished from plain Percutaneous by the presence of scope-guided visualization, and from Via Natural or Artificial Opening Endoscopic by its route being a new puncture rather than an existing orifice or stoma.

Device: Drainage Device

Drainage Device denotes a device such as a tube or catheter left in place to remove fluid, blood, or air from a body part or cavity following a procedure. It is distinguished from Monitoring Device, which senses and records physiologic data rather than evacuating substances from the body.

Coding & Documentation

A code from this family applies when documentation shows a device is being taken out and no new device is being put in its place at that same site during the same encounter; if the old device is removed and immediately replaced with a new one, that exchange is typically captured with a different root operation combination or specific replacement coding guidance rather than Removal alone. Coders should verify exactly what type of device was removed and from which specific body part, since a stent removed from the esophagus is coded differently than one removed from the colon. A frequent error is coding Removal when the physician actually repositioned or adjusted a device rather than taking it out entirely, or when removal was immediately followed by replacement with a similar device, which changes the coding approach. Documentation should clearly state the device type and confirm it was not replaced in the same operative episode for a clean Removal code to apply.

Commonly Confused With

RevisionRemoval is frequently confused with Revision, which applies when a device is corrected or adjusted in place rather than taken out, such as repositioning a slipped gastrostomy tube without fully removing it.
InsertionIt is also confused with procedures where a device is removed and a new one placed in the same session, since the coding conventions for that scenario differ from a standalone Removal and often require pairing Removal with an Insertion code for the new device rather than treating it as a single combined action.