0QSG0BZ
Reposition Tibia, Right to No Qualifier with External Fixation Device, Monoplanar, Open Approach
Procedural Specifications
| Clinical Axis | Detail Definition |
|---|---|
| Section | 0 Medical and Surgical |
| Body System | Q Lower Bones |
| Operation | S Reposition |
| Body Part | G Tibia, Right |
| Approach | 0 Open |
| Device | B External Fixation Device, Monoplanar |
| Qualifier | Z No Qualifier |
Operation Definition
Moving to its normal location, or other suitable location, all or a portion of a body part
Procedure Overview
Reposition procedures move a lower bone, or a fragment of one, from an abnormal location to its correct anatomical position, or to another location that will let it function properly. This is the category most fracture reductions fall into, along with corrective osteotomies performed to realign a bone that has healed crookedly or grown abnormally, and procedures that move a bone segment to a new site for reconstructive purposes.
These operations address displaced fractures of the pelvis, femur, tibia, fibula, patella, or foot bones, as well as deformities such as a bowed tibia or a malaligned metatarsal that needs to be cut and shifted into better alignment. Fixation devices like plates, screws, rods, or external fixators are frequently used alongside the repositioning to hold the bone in its new location while it heals.
Anatomy & Axis Detail
Tibia, Right
The right tibia is the primary weight-bearing bone of the lower leg, and its alignment directly affects knee and ankle mechanics as well as overall limb length. Reposition is applied when a fracture fragment, an angular deformity, or a malunion has displaced the shaft or a segment out of its normal axis, requiring the surgeon to move the bone back into correct anatomical position without removing or replacing tissue. This can be accomplished through closed manipulation with fluoroscopic guidance or through an open approach that exposes the fracture site directly. Because the tibia bears substantial mechanical load, restoring proper rotation and length is essential, and documentation should reflect whether fixation hardware was placed as an additional, separately coded procedure.
Approach: Open
Open approach means the surgeon cuts through skin, mucous membrane, or other tissue layers to physically expose the target site to view before performing the procedure. It gives direct visualization and hands-on access, distinguishing it from Percutaneous approaches where instruments pass through a small puncture without exposing the site. Open is typical for procedures needing wide access, such as most laparotomies.
Device: External Fixation Device, Monoplanar
A monoplanar external fixation device uses pins placed and connected within a single plane, forming a simpler, lower-profile frame typically used for straightforward fracture stabilization. It contrasts with a ring fixator, which encircles the limb for multiplanar control, and a hybrid fixator, which combines both configurations.
Coding & Documentation
The operative note needs to document that a bone or bone fragment was moved to a different position, whether by closed manipulation or open surgical exposure, and should specify any fixation device left in place, since that device is captured as a separate value on the same code rather than a separate procedure. Coders must distinguish open versus percutaneous versus external approaches carefully, as this changes the approach value substantially. A common mistake is coding a simple cast application or splinting as Reposition when no manipulation of bone position actually occurred, and another is failing to capture the device value when hardware is placed during the same reduction.