ICD-10-PCS Billable Code

02WY07Z

Revision Great Vessel to No Qualifier with Autologous Tissue Substitute, Open Approach

Procedural Specifications

Clinical Axis Detail Definition
Section0 Medical and Surgical
Body System2 Heart and Great Vessels
OperationW Revision
Body PartY Great Vessel
Approach0 Open
Device7 Autologous Tissue Substitute
QualifierZ No Qualifier

Operation Definition

Correcting, to the extent possible, a portion of a malfunctioning device or the position of a displaced device

Procedure Overview

Revision procedures correct a malfunctioning device already implanted in the heart or great vessels, or fix the position of a device that has shifted from where it was originally placed. This covers situations like repositioning a dislodged prosthetic valve component, adjusting a misplaced graft, or correcting mechanical problems with an implanted device without removing it entirely and starting over.

Devices in the heart and great vessels, including prosthetic valves, grafts, and other implants, can shift position over time or develop a mechanical problem that falls short of complete failure. Revision addresses that specific problem, restoring the device to proper function or position rather than treating the underlying cardiac tissue itself.

This differs from a full device replacement, since Revision is aimed at fixing what is already there to the extent that is possible, not swapping in a new device.

Anatomy & Axis Detail

Great Vessel

This body part value applies to great vessels other than the aorta itself, such as the pulmonary artery trunk, superior vena cava, or pulmonary veins when they carry prior graft or repair material requiring correction. Revision addresses malfunctioning conduits, patches, or stents placed in these vessels, often in the context of congenital heart repairs where multiple vessels are reconstructed during childhood and require adjustment as the patient grows or as material degrades. Because these vessels vary widely in diameter and pressure compared with the aorta, revision technique and risk differ substantially depending on which specific great vessel is involved. Documentation should specify the exact vessel and the prior implant being corrected to support accurate code assignment.

Approach: Open

Open approach means the surgeon cuts through skin, mucous membrane, or other tissue layers to physically expose the target site to view before performing the procedure. It gives direct visualization and hands-on access, distinguishing it from Percutaneous approaches where instruments pass through a small puncture without exposing the site. Open is typical for procedures needing wide access, such as most laparotomies.

Device: Autologous Tissue Substitute

Autologous Tissue Substitute identifies a device value where material harvested from the patient's own body, such as an autograft, is used to replace or reconstruct a body part. Its defining feature is tissue origin from the patient, setting it apart from Nonautologous Tissue Substitute, sourced from a donor or animal, and Synthetic Substitute, made of manufactured material.

Coding & Documentation

Coders assign Revision when the documentation describes correcting or adjusting a device already in place, whether due to malposition or a mechanical issue, and the existing device remains rather than being taken out and replaced with a new one. The note should identify the specific device involved and describe what was wrong with it and what corrective action was taken.

A common error is coding Revision when the device was actually removed and a new one implanted, which should instead be coded using Removal and Insertion or Replacement depending on what happened. Another frequent mistake is failing to recognize that some device problems, like a prosthetic valve that has failed structurally beyond correction, call for full replacement rather than Revision, so the coder needs to confirm from the note whether the original device was fixed or discarded.

Commonly Confused With

ReplacementRevision is frequently confused with Replacement, and the key distinction is whether the existing device was corrected in place, as in Revision, or taken out and substituted with a new one, as in Replacement.
RemovalIt also differs from Removal, which is coded separately when a device is taken out without immediate reinsertion of a corrected or new device.