0MU107Z
Supplement Shoulder Bursa and Ligament, Right to No Qualifier with Autologous Tissue Substitute, Open Approach
Procedural Specifications
| Clinical Axis | Detail Definition |
|---|---|
| Section | 0 Medical and Surgical |
| Body System | M Bursae and Ligaments |
| Operation | U Supplement |
| Body Part | 1 Shoulder Bursa and Ligament, Right |
| Approach | 0 Open |
| Device | 7 Autologous Tissue Substitute |
| Qualifier | Z No Qualifier |
Operation Definition
Putting in or on biological or synthetic material that physically reinforces and/or augments the function of a portion of a body part
Procedure Overview
Supplement procedures add biological or synthetic material to reinforce or augment a bursa or, much more commonly, a ligament that remains largely intact but needs additional structural support. A typical example is augmenting a partially torn ligament with a collagen patch, mesh, or allograft strip to bolster its strength without removing and fully replacing the native tissue.
This approach is chosen when a ligament has enough healthy tissue to preserve but is not strong enough on its own to withstand normal joint stress, often in cases of chronic laxity, partial tearing, or degenerative thinning. It is also used in some reconstructive techniques that combine native ligament preservation with graft augmentation, an increasingly common alternative to full replacement for certain knee and ankle ligament injuries. The added material integrates with the existing structure over time, aiming to restore joint stability while keeping as much of the patient's own tissue as possible.
Anatomy & Axis Detail
Shoulder Bursa and Ligament, Right
The shoulder bursa and ligament group includes the subacromial and subdeltoid bursae along with the glenohumeral, coracoacromial, and coracoclavicular ligaments that stabilize the most mobile joint in the body. Supplement procedures here use autograft, allograft, or synthetic material to reinforce a ligament that has stretched or partially torn, most often in the setting of chronic instability, rotator cuff-related impingement, or acromioclavicular separation, rather than replacing a structure that is completely absent. Because the shoulder relies on soft tissue tensioning more than bony constraint for stability, the surgeon augments the existing capsule or ligament in place to restore the normal tension band without removing the native tissue. Right-sided coding depends on documentation specifying laterality and confirming that reinforcement, not full replacement, was performed.
Approach: Open
Open approach means the surgeon cuts through skin, mucous membrane, or other tissue layers to physically expose the target site to view before performing the procedure. It gives direct visualization and hands-on access, distinguishing it from Percutaneous approaches where instruments pass through a small puncture without exposing the site. Open is typical for procedures needing wide access, such as most laparotomies.
Device: Autologous Tissue Substitute
Autologous Tissue Substitute identifies a device value where material harvested from the patient's own body, such as an autograft, is used to replace or reconstruct a body part. Its defining feature is tissue origin from the patient, setting it apart from Nonautologous Tissue Substitute, sourced from a donor or animal, and Synthetic Substitute, made of manufactured material.
Coding & Documentation
Coders assign Supplement when the operative note describes reinforcing an existing bursa or ligament with graft, mesh, or other material while the native structure is left in place, not excised. Key language includes "augmented," "reinforced," or "buttressed with graft." The most frequent error is confusing this with Replacement - if the surgeon documents that the damaged ligament was removed before the new material was placed, Replacement is correct instead. Coders should also confirm the supplementing material is a recognized device or biologic value, since the device character of the procedure affects code selection.